Doc Updates

As I work on this documentation I will try to list the major changes/updates that occur

3/30/2024

• Updated section titled If using an MGN12C rail for the X-axis to describe that the X/Y joiner parts come in a +70 and a +75 variant
• Updated section titled Folders: XYMotion/XRail/Joiners and XYMotion/XRail/Carriage_Basic by adding a listing of the available .stl files and also a description of which of these files to print depending on whether you're using +70mm or +75mm extrusion.
• Updated section titled to describe which (if any) of EndStopBumperLeft.stl or EndStopBumperRight.stl should be printed.
• Added new section titled Folder: XYMotion/EndStopY that describes the parts to choose from for mounting an endstop switch for Y axis.
• Added new section titled Frame that will describe the frame
• Added new section titled A/B Motors that will describe the A/B motors

3/26/2024

• Added this Doc Updates section
• The section What you'll need was updated
  • Replaced the clunky markdown table that was used for the BOM with an embedded Google Sheet as well as a clickable link to the sheet
  • Added a "deburring tool" as a suggested tool
• The section The sizes of things was updated
  • A description for the MGN12C rail was added
  • A description for the T-platform was added